Using your Bravenet e-mail account: Difference between revisions


(Updated General config w/ more comprehensive information. Fixed creating an email account link.)
(Clarified a few points)
Line 30: Line 30:
* IMAP Server: <tt>mail.bravehost.com</tt>, or you can use <tt>mail.yourdomain.com</tt> where <tt>yourdomain.com</tt> is the domain of your Bravenet email address.
* IMAP Server: <tt>mail.bravehost.com</tt>, or you can use <tt>mail.yourdomain.com</tt> where <tt>yourdomain.com</tt> is the domain of your Bravenet email address.
* IMAP Port: 143
* IMAP Port: 143
* Connection Security: None (unencrypted), or STARTTLS (secure).
* Username: the email address you are checking
* Username: the email address you are checking
* Password: the password for this address. You can change this in the email tab of your Bravenet account.
* Password: the password for this address. You can change this in the email tab of your Bravenet account.
Line 53: Line 54:
* POP3 Server: <tt>mail.bravehost.com</tt>, or you can use <tt>mail.yourdomain.com</tt> where <tt>yourdomain.com</tt> is the domain of your Bravenet email address.
* POP3 Server: <tt>mail.bravehost.com</tt>, or you can use <tt>mail.yourdomain.com</tt> where <tt>yourdomain.com</tt> is the domain of your Bravenet email address.
* POP3 Port: 110
* POP3 Port: 110
* Connection Security: None (unencrypted), or STARTTLS (secure).
* Username: the email address you are checking
* Username: the email address you are checking
* Password: the password for this address. You can change this in the email tab of your Bravenet account.
* Password: the password for this address. You can change this in the email tab of your Bravenet account.
Line 60: Line 62:


Outgoing mail uses SMTP. The information you need for that:
Outgoing mail uses SMTP. The information you need for that:
Secure Configuration (Recommended):
* SMTP server: <tt>mail.bravehost.com</tt>
* SMTP port: 465
* Connection Security: STARTTLS
* Username: the e-mail address you are checking
* Password: the password for this address. You can change this in the email tab of your Bravenet account.
Alternative Configuration:


* SMTP server: <tt>mail.bravehost.com</tt>, or you can use <tt>mail.yourdomain.com</tt> where <tt>yourdomain.com</tt> is the domain of your Bravenet email address.
* SMTP server: <tt>mail.bravehost.com</tt>, or you can use <tt>mail.yourdomain.com</tt> where <tt>yourdomain.com</tt> is the domain of your Bravenet email address.
* SMTP port: 587 (you may be able to use port 25 but this is disabled for many users)
* SMTP port: 587 (you may be able to use port 25 but this is disabled for many users)
* Connection Security: None (unencrypted)
* Username: the e-mail address you are checking
* Username: the e-mail address you are checking
* Password: the password for this address. You can change this in the email tab of your Bravenet account.
* Password: the password for this address. You can change this in the email tab of your Bravenet account.
* Authentication: PLAIN





Revision as of 15:22, 12 June 2012

Once you have finished Creating a new e-mail account, you can check it in a variety of ways:

Webmail

You can access your e-mail through our webmail system at https://webmail.bravehost.com. When prompted, just enter your e-mail address and the password associated with that address. If you forget your e-mail password, you can reset it in the e-mail tab of your Bravenet account.

Mail Clients

You can also use most third-party e-mail clients to send and receive mail. We've provided step-by-step instructions for a few common clients. For other e-mail clients, use the general information directly below, and refer to your e-mail client's documentation for information on how to enter this data.

General Settings

The exact steps to set up your email client differ based on the client. In general you will need the following information. This assumes that you've created a Bravenet email address in the email tab of your account already.

Incoming Mail Servers

IMAP

In each example, yourdomain.com should be replaced by the actual domain name that your e-mail address uses. For example, if your e-mail address is test@example.com then your mail server might be mail.example.com

Secure Configuration (Recommended):

  • IMAP Server: mail.bravehost.com
  • IMAP Port: 993
  • Connection Security: SSL/TLS
  • Username: the email address you are checking
  • Password: the password for this address. You can change this in the email tab of your Bravenet account.

Alternative Configuration:

  • IMAP Server: mail.bravehost.com, or you can use mail.yourdomain.com where yourdomain.com is the domain of your Bravenet email address.
  • IMAP Port: 143
  • Connection Security: None (unencrypted), or STARTTLS (secure).
  • Username: the email address you are checking
  • Password: the password for this address. You can change this in the email tab of your Bravenet account.
  • Authentication Type: Password


POP3

POP3 is an older method of checking mail. It should only be used if your e-mail client doesn't support IMAP, since POP3 doesn't support checking mail from multiple locations, and by default it doesn't store messages on the server.

In each example, yourdomain.com should be replaced by the actual domain name that your e-mail address uses. For example, if your e-mail address is test@example.com then your mail server might be mail.example.com

Secure Configuration (Recommended):

  • POP3 Server: mail.bravehost.com
  • POP3 Port: 995
  • Connection Security: SSL/TLS
  • Username: the email address you are checking
  • Password: the password for this address. You can change this in the email tab of your Bravenet account.

Alternative Configuration:

  • POP3 Server: mail.bravehost.com, or you can use mail.yourdomain.com where yourdomain.com is the domain of your Bravenet email address.
  • POP3 Port: 110
  • Connection Security: None (unencrypted), or STARTTLS (secure).
  • Username: the email address you are checking
  • Password: the password for this address. You can change this in the email tab of your Bravenet account.


Outgoing Mail Servers

Outgoing mail uses SMTP. The information you need for that:

Secure Configuration (Recommended):

  • SMTP server: mail.bravehost.com
  • SMTP port: 465
  • Connection Security: STARTTLS
  • Username: the e-mail address you are checking
  • Password: the password for this address. You can change this in the email tab of your Bravenet account.

Alternative Configuration:

  • SMTP server: mail.bravehost.com, or you can use mail.yourdomain.com where yourdomain.com is the domain of your Bravenet email address.
  • SMTP port: 587 (you may be able to use port 25 but this is disabled for many users)
  • Connection Security: None (unencrypted)
  • Username: the e-mail address you are checking
  • Password: the password for this address. You can change this in the email tab of your Bravenet account.



Microsoft Outlook

Note - this is for Microsoft Outlook, as it ships with Microsoft Office (it has a yellow icon). This does not include Outlook Express (blue and white icon), which is installed by default on Windows XP - see below for Outlook Express instructions.

  1. Start Microsoft Outlook
  2. Click the Tools menu, then the E-Mail Accounts option
  3. Click Add a new e-mail account then click Next
  4. Choose IMAP from the options then click Next
  5. Fill out the following fields:
    1. Your Name - enter your name here
    2. E-Mail Address - enter the Bravenet email address you are adding here
    3. Incoming mail server - enter mail.bravehost.com
    4. Outgoing mail server - enter mail.bravehost.com
    5. Username - enter your Bravenet email address
    6. Password - enter the password for the Bravenet email address
  6. Click the More Settings... button
  7. Change to the Outgoing Server tab, and enable the My outgoing server require authentication checkbox
  8. Change to the Advanced tab, and change the Outgoing Server port number from 25 (the default) to 587
  9. Click the OK button to close the advanced settings window, then click Next on the E-Mail Accounts window
  10. Click the Finish button on the next page and your account should now work correctly

Make sure to send a test email to another email address you have access to to verify that everything is set up correctly.

Outlook Express

Note - these instructions are for Outlook Express (a blue and white icon), that ships with Windows XP. If you have Outlook, with a yellow icon, that ships with Microsoft Office, see the Outlook directions above.

  1. Start Outlook Express
  2. If you don't see the Internet Connection Wizard popup:
    1. click the Tools menu;
    2. then the Accounts option;
    3. then the Add button. Choose mail from the options listed
  3. You should see the Internet Connection Wizard now. Enter your full name here then click Next.
  4. Enter the Bravenet email address you are adding then click Next.
  5. On this screen, change the following:
    1. Change the incoming mail server option from POP3 to IMAP.
    2. Enter mail.bravehost.com in both the Incoming and Outgoing server fields
  6. then click Next.
  7. Enter the Bravenet email address in the Account Name field, and then the password for that address in the Password field, then click Next.
  8. Click Finish to close the window. If you are asked to download your mail or import folders, click No. Now, If you don't see the Internet Accounts screen, open it in the Tools menu under the Accounts option
  9. Click on the account you just set up - it will likely be named mail.bravehost.com. Then, click on the Properties button.
    1. Change to the Servers tab
    2. Enable the My server requires authentication checkbox
    3. Change to the Advanced tab
    4. change the Outgoing Mail port number from 25 (the default) to 587
  10. Click OK to save your changes and close the advanced properties window.
  11. Click Close to close the Internet Accounts window
  12. You may now be asked if you want to download the folders from the server you added. Click Yes, and then OK on the next window
  13. Either way, click the Send/Recv button to sync up your email. Everything should now work!

Try sending a test message to verify that your email is set up correctly.